Showing posts with label overview. Show all posts
Showing posts with label overview. Show all posts
Monday, October 17, 2016
Asus Transformer Book T300 Chi Overview
Asus Transformer Book T300 Chi Overview
Asus Transformer Book T300 Chi Overview
Asus Transformer Book T300 Chi Overview - The Asus Transformer Book T300 Chi has a great deal putting it all on the line. For one, its incomprehensibly thin for a tablet and smart phone two-in-one. Its high-determination 12.5-inch show unquestionably makes it emerge in the specs office as well.
 |
Asus Transformer Book T300 Chi Overview |
Anyhow the half breeds slenderness isnt without a few bargains, and one thing promptly perceptible is the absence of USB ports on the tablet - theres stand out micro-USB. Moreover, Asus hasnt made cost or any discharge date data accessible for the time being. I figure however, provided for its premium situating, this wont be modest.
Show and configuration
I figured out how to get a few active time with the Chi here at Computex, and the two-in-one absolutely inspired. The tablet share felt robust, keeping in mind you think something this thin will have a ton of flex, the Chi was strong completely. Outlandishly thin at 7.3mm, the tablet looks much the same as a bit of metal, with scarcely enough space inside to hold the capable Intel Broadwell M fittings.
 |
| Asus Transformer Book T300 Chi Overview |
Indeed the console parcel is level, which may not offer the ideal writing background. At the point when docked, in any case, the console is a bit raised, which may help to a degree. I perceived that the weight is by all accounts adjusted towards the top, yet this bodes well, on the grounds that it will help to backing the tablet when both parts are conjoined.
 |
| Asus Transformer Book T300 Chi Overview |
The 12.5-inch showcase accompanies a 2,560x1,440-pixel determination, which makes for super-sharp clarity. While its awkward to use with one hand, I think the Chi will be incredible for perusing funnies and viewing features.
Specs and peculiarities
Dissimilar to the 12-inch Microsoft Surface Pro 3, the Chi just has one micro-USB port. This implies youll have to utilize a center in the event that you need to unite a hard drive for more stockpiling. Theres likewise no microsd card space either, so in the event that you need more storage room, youll likely need to utilize an outside peruser.
 |
| Asus Transformer Book T300 Chi Overview |
The one thing that the Chi improves over the Surface Pro 3, then again, is the accessibility of 4g integration. This will make for a more versatile journal - you wont need to rely on upon Wi-Fi systems to get on the web.
The Chis Intel Broadwell M chipset has a fanless plan and will backing up to 4gb of RAM. It runs the most late Windows 8.1 item.
Viewpoint
I like what Asus is doing with the Transformer Book T300 Chi, yet until evaluating and full specs are discharged, its difficult to precisely say its superior to its closest rival, the Microsoft Surface Pro 3.
The Chi is an energizing item from the Taiwanese producer, and has produced a lot of buzz here at the show. Im anticipating auditing one when its prepared.
Go to link download
Saturday, August 6, 2016
Rebuild a failed RAID high level overview
Rebuild a failed RAID high level overview
RAID Rebuild
This guide provides a high-level overview of steps required to rebuild a failed RAID. Sometimes, the term "RAID rebuild" refers to the process of the redundancy regeneration in RAID 5. We are however discussing general aspects of RAID data recovery.
So, if you discovered that RAID has failed then act according to the following plan:
- Determine and secure the current array state. Label the disks, cables, ports, controller configuration (all the information you can find out - read more at this RAID Recovery Guide).
- Disconnect the array member disks and connect them to the controller which is capable of working with separate disks. It can be either a non-RAID controller or a RAID-controller in single drive mode.
- Launch ReclaiMe Free RAID Recovery and recover the array parameters.
- If the controller and RAID monitoring software allow you to build the array without initializing it, then try to build the array in this mode according to the parameters determined by ReclaiMe Free RAID Recovery. Be very careful if you attempt this, because if you rebuild RAID 5 with wrong disk order you will lose data; on top of that, a controller can initialize the array with zeros.
- In case of a hardware RAID, you can write the array to the disk using the corresponding feature of ReclaiMe Free RAID Recovery and then try to mount the disk in whatever operating system was used. If you have not got the disk large enough then you can build a temporary array and write data on it. Anyway, never write any data to the member disks of the original array.
- If you have a software RAID - created by LDM or mdraid, you need a data recovery software. Here there are two options:
- Create an array image file and load it to the data recovery tool.
- Somehow load the recovered array parameters to data recovery software, bypassing the image part.
- Once data is saved and checked (always open at least several large files to be sure that data is reconstructed properly), you can rebuild the original RAID and copy data back.
Go to link download
Subscribe to:
Posts (Atom)